HORSCH
SHARE VARIANTS FOR EVERY APPLICATION
The MulchMix crowd is designed with its steep crowd angle for the intensive mixing of crop residues and the deeper processing. Due to the large radius (600 mm) of the HORSCH MulchMixShares, the soil is not pressed and its structure is retained. No matter which working depth is selected: the share is never vertical in the ground. This reduces the pulling force, protects the ground and saves valuable fuel. It achieves excellent mixing quality even with large amounts of straw. The MulchMix share consists of three components (tip, guide plate, wing) that can be changed independently of each other. The wings can be brought into a flat position for very shallow stubble cultivation and cutting off the entire surface. If the soil is to be loosened deeply and at the same time as an excellent mixture, the wings can simply be removed.
The new development HORSCH TerraCut coulter is used for flat, full-surface tillage up to a maximum depth of 8 cm. The 40 cm wide wing share is combined with the well-known LD or LD + share point and can be used on all HORSCH TerraGrip share handles. The flat setting angle of the TerraCut coulter ensures a reliable cutting effect and a low mixing effect for effective drying out of growth or catch crops.
If deep loosening is sufficient and no mixing should take place, HORSCH LD shares can be installed, which loosen up to 15 cm underground very well and do not allow large earth movements to take place.